Tuner Operation; Station Preset Memory; Preset Tuning; Direct Access Tuning - Kenwood KDC-X494 Quick Start Manual

Tuner Operation

Station Preset Memory

Putting a station in the memory.
1
Select the frequency to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Press the [ ] button.
3
Preset the station
Turn the Control knob to select preset number
("P1" – "P6"), and then press the [ENTER] button
for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [ ] button.

Preset Tuning

Recalling the stations in the memory.
1
Enter Preset Tuning mode
Press the [ ] button.
2
Recall the station
Turn the Control knob to select recall number
("P1" – "P6"), and then press the [ENTER].
Cancelling Preset Tuning
Press the [ ] button.
14
|
KDC-X494/ KDC-MP445U/ KMR-440U
Function of remote control

Direct Access Tuning

Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency Press button
92.1 MHz (FM) [9], [2], [1]
810 kHz (AM) [8], [1], [0]
3
Search the frequency
Press the [4] or [¢] button on the remote
control.
Cancelling Direct Music Search
Press the [ ] button on the remote control.