X'over Setting; Equalizer Control; Preset Position Setting - Kenwood KDC-BT742U Instruction Manual

Function of KDC-BT742U
Audio Adjustments (OSP)
You can set a X'Over value for the speakers;
"F-ALL"
Not compensating.
Front-Left seat
Front-Right seat
Front seat
1
Enter Position setting mode
Select "DSP"
>
"CONTROL"
>
"POSITION"
>
"PRESET'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the seat you want to compensate
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Exit Position setting mode
Press the [SEARCH] button.
According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
Preset position setting
1
Enter Equalizer Control mode
Select "DSP"
>
"CONTROL"
>
"EQ'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
iPod Equalizer
1. Enter iPod Equalizer mode
Press the [AUD] button.
2. Set the value
Turn the [AUD] knob and push the center
when the desired item is displayed.
4
Exit Equalizer Control mode
Press the [SEARCH] button.
Center "FO"
Frequency
---,------
Quality "Q" 0.25/0.50/1.00/2.00
- - -
Level "GAIN" -9/-7/-5/-3/-2/-1/01+11
+21 +31 +51 +71 +9
THRU (Through) /40/60/70/80
1100/120/150/180/220 Hz
=-,----
THRU (Through) 140/60/70/80
1100/120/1501 1801 220 Hz
- - -
40/60/70/8011001120/150 I
_ _ _ _ _ 1801
220ITHRU (Through) Hz
REVERSE
(180 0
)/
NORMAL (0
0
)
Equalizer
agjust
"MANUAI"1
"BAND"
Preset
memory
"PRESET"
Equalizer Control
You can adjust following Equalizer Control items.
iPod Equalizer can be set after connecting iPod and
selecting "iPod" in <System Q>. Select from the 22
equalizer types;
• The frequency which can be selected by each Frequency
band is shown below.
1
Enter X'Over setting mode
Select "DSP"
>
"SETUP"
>
"X'OVER'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3
Set the X'Over value
Turn the [AUD] knob and push the center when
the desired value is displayed.
4
Exit X'Over setting mode
Press the [SEARCH] button.
X'Over setting
"BANDl"
"BAND2"
"BAND3"
60/100/1601 2501 400
Hz
630/1 k/1.6kl
2.5k Hz
4/6.3/10/16 kHz
24
I
KDC-BT742U/ KDC-X493/ KDC-MP442U