Audio Adjustments; Audio Control; Adjusting The Detail Of Audio Control - Kenwood KDC-BT742U Instruction Manual

Audio Adjustments
Audio Control
You can adjust following Audio Control items;
AdI9mh.,t!~i • • ilij~~I~\j01 ~"
Rear volume "R-YOLUME" 0- 35
- - - - - - -
Subwoofer level "SUB-W l" -15 -
+
15
- - - - - - -
Bass Boost* "B.BOOST" "STEPl"/"STEP2"/"OFF"
(The indicator turns on
according to the setting.)
- - - - -
System Q* "NATURAl" /"USER"/ Natural/User setting/Rock!
"ROCK"/"POPS"/"EA Pops/Easy/Top 40/Jazz/
SY"/"TOP40"!"JAZZ" Game
/"GAME"
-=----,---,-,----
Bass level* "BASS l" -8 - +8
- - - - - - -
Middle level* "MID l" -8 - +8
- - - - - - -
Treble level* "TRE l" -8 - +8
.,......-:-...,..,,-----=--:-...,..,,----
Balance "BALANCE" Left 15 - Right 15
Fader "FADER" Rear 15 - Front 15
Exit Audio Control mode (Volume control mode)
* Function of KDC-X493/MP442U.
~
~
• Source tone memory: You can set Bass, Middle, and
Treble for each source.
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Control mode
Press the [AUD) knob.
3
Select the Audio item to adjust
Press the [AUD] knob.
4
Adjust the Audio item
Turn the [AUD] knob.
S
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or
[~]
button.
20
I KDC-BT742U1 KDC-X493/ KDC-MP442U
Function
of
KDC-X493
Adjusting the detail of Audio Control
You can adjust the following Basic Audio Items in
datail: Bass level, Middle level, and Treble leva!.
Bass level
Bass QFactor "BASS Q"
-=-B-as-' s E,-xt-en-,d---- "BASS EXT"
Middle level
Ad~_~~.%.o!WI\;;0.tlRlP9~;i\~.l~~l~;;i~S;;~t~~~'
Middle Center Frequency "MID F" 0.5/1.0/1.5/2.0 kHz
Middle QFactor "MID Q" 1.0/2.0
Tr.bl./evel
Adj_ul~;"I9!W*€f~g ~·"i"\i"i;r:'r~:;~,'t.
Treble Center Frequency "TRE F" 10.0/12.5/15.0/17.5 kHz
1
Select the Basic Audio item
For how to select Basic Audio items, see <Audio
Control> (page 20).
2
Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [AUD] knob.
4
Adjust the Detail Audio item
Turn the [AUD] knob.
S
Exit the Detail Audio Control mode
Press the lAUD] knob for at least 1 second.
~
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob or [~]
button.