Audio Preset Memory; Audio Preset Recall; Ikdc-Bt742U/ Kdc-X493/ Kdc-Mp442U - Kenwood KDC-BT742U Instruction Manual

Audio Adjustments
FunctionofKDC-X493/MP442U
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 20)
- <Audio Setup> (page 21)
2
Enter Audio Preset Memory mode (Other than
Standby mode)
Select "MENU"
>
"AUDIO
PRESET'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3
Select the Audio Preset Memory
Turn the [AUD] knob.
Select the "MEMORY" display.
4
Determine whether to put the Audio Preset in
the memory
Press the [AUD] knob.
S
Put the Audio Preset in the memory
Turn the [AUD] knob to select "YES'~ and then
press the [AUD] knob.
"COMPLETE" is displayed.
6
Exit Audio Preset mode
Press the [SERACH] button twice.
~
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Volume offset, Dual Zone System,
Rear Volume
22
I
KDC-BT742U/ KDC-X493/ KDC-MP442U
Function of KDC-X493/MP442U
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 22).
1
Select the source
2
Enter Audio Preset Recall mode (Other than
Standby mode)
Select"MENU"
>
"AUDIO
PRESET'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3
Select the Audio Preset Recall
Turn the [AUD] knob.
Select the "RECALL" display.
4
Determine whether to recall the Audio Preset
Press the [AUD] knob.
S
Recall the Audio Preset
Turn the [AUD] knob to select
"YES'~
and then
press the [AUD] knob.
"COMPLETE" is displayed.
6
Exit Audio Preset mode
Press the [SERACH] button twice.
~
• The User memory of "SYSTEM Q"in <Audio Control>
(page 20) is changed to the value which was recalled.
• The source tone memory item of <Audio Control> (page
20) is changed to the value which was recalled by the
selected source.