Basic Operation - Kenwood KDC-BT742U Instruction Manual

Basic Operation
[(~]
Release Microphone Disc slot
[~]
[AUTO]
1
t
1
l
~o~ JP~
III~
'\
KENWOOD /
[~II]
lAUD] [SEARCH] [FAVORITE] [SRCl Auxiliary input USB Terminal
General functions
-------
Power/Source Select button: [SRC]
Turns on the power.
When the power is on, the source switches betvyeen
Tuner ("TUNEW) , USB or iPod ("USB" or"iPod H ),
CD ("CD") ,Auxiliary input ("AUX H ), arid Standby
(HSTANDBY") each time this button is pressed.
Press at least 1 second to turn offthe power.
~
• When an optional accessory is conneeted, the source name
for each
devic~
appears: . ....•... • . •
• When connection onne iPod isrecogl)ized,the source
display changes from "USB" to
"iPod~
Volume control: [AUD] knob
Turn the knob to adjustthe volume.
Subwoofer output: [AUD] knob
SWitches
betweenO~
rSUBWOOFER ON
H)
and OFF
(HSUBWOOFER OFF") each time pushing toward down
for at least 2 seconds.
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5
0).
(§2
• Use the mini-plug cable which is stereo type and does not
have any resistance.
• The auxiliary input requires the se~ing made in "MENU' >
"AUX' of <Function Control> (page 6).
4
I
KDC-BT742U1 KDC-X493/ KDC-MP442U
Faceplaterelease: Release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate. ' . .
@.~
~
."
&.
• .The faceplate'is a piece of equipmentand
damaged byshocks or jolts.
• Keep the faceplate in its faceplate case while detached.
; Do not place the faceplate (and the faceplate sase) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
• To prevenfdeterioration, do nottouch the terminals of the
· unit or faceplate With your fingers:
Text/Title scroll:
[AUD] knob
Scrolls the CD and audio file text displaywhen
pushing toward up for at least 2 seconds.
Muting volumetipon
recepti~n
of phone call
(Functionof KDC-X493/ MP442U)
When there is a call, "CALL" is displayed and the audio
system is paused.
When the call ends, ·CALL' disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
~
• To use the TEL Mute feature, you need
to
hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
42).