Deleting A Registered Bluetooth Device; Displaying The Firmware Version; Adding A Voice Dialing Command - Kenwood KDC-BT742U Instruction Manual

Function of KDC-BT742U
Bluetooth Setup
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Enter Bluetooth device deletion mode
Select "MENU"
>
"DEVICE
DEl'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
'(name)' is displayed.
2
Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down.
3
Delete the selected Bluetooth device
Press the [AUD] knob for at least 1 second.
4
Exit the Bluetooth device deletion mode
Press the [SEARCH] button.
~
• When a registered cell-phone is deleted, its Phone Book,
log, 5M5, and voice tag are also deleted.
Displaying the Firmware Version
Display the version of the firmware of this unit.
1
Enter Bluetooth Firmware update mode
Select "MENU"
>
"BT FIW
UPDATE'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
The firmware version appears.
2
Exit Bluetooth Firmware update mode
Press the [SEARCH] button.
~
• For how to update the firmware, access our website.
http://www.kenwood.com/bt/information/
30
I
KDC-BT742U/ KDC-X493/ KDC-MP442U
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1
Enter voice tag mode
Select "MENU"
>
"VOICE
TAG'~
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select "PB NAME EDIT" mode
Press the [AUD] knob to select "PB NAME
EDIT'~
and then press the [AUD] knob for at least 1
second.
3
Search for the name to register
Select the name to register with reference to 4 in
<Calling a number in the PhoneBook> (page 16).
If a voice tag has already been registered for a
name,
"*"
is displayed before the name.
4
Select a mode
Turn the [AUD] knob or push it towards up or
down.
"PB NAME REG" Register avoice tag.
- - - - - - -
- , , " P: - : : - B . . . , . , N A. . . , . , M c- : : E - - : : - C H- : : c - K - . , . , " * -=-PI--:,-ay_a_vo_i c _et_ag
L
. _
"PB NAME DEL'* Delete avoice tag.
----,--,-~-,------
"RETURN" Return to step 2.
*
Displayed only when a name for which a voice tag has
been registered is selected.
Se'«t npB NAME REG H (Reglst)
5
Register a voice tag (first)
Press the [AUD] knob.
"ENTER1" is displayed.
When a beep is heard, utter a voice tag within 2
seconds.
6
Confirm the voice tag (second)
Press the [AUD] knob.
"ENTER2" is displayed.
When a beep is heard, utter the same voice tag as
that you uttered in step 4 within 2 seconds.
"COMPLETE" is displayed.
7
End registration
Press the [AUD] knob.
Return to step 2. You can register another voice tag
continuously.
~
• If your voice cannot be recognized, a message is
displayed. Pressing the [AUD] knob allows you to retry
voice input (page 44)