Tuner Operation; Auto Memory; Tuner Setting - Kenwood KDC-U7053BT Instruction Manual

Tuner operation

For the basic operations to listen to the radio, refer
to the Quick Start Guide.

Auto memory

You can register 18 (FM)/ 6 (AM) stations with good
reception automatically.
1
Select the Tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the Auto memory function item
Select the following items using the Control
knob.
"Settings" > "Auto Memory"
4
Start storing stations in the Auto memory
mode
Turn the Control knob to select "YES", and then
press the Control knob.
When 18 (FM)/ 6 (AM) stations that can be received
are stored in the memory, the process in this mode
is completed.
14
|
KDC-U7053BT/ KDC-U7053BTL

Tuner setting

You can set up the tuner.
1
Select the Tuner source
Press the [SRC] button.
Select the "TUNER" display.
2
Enter the Function setting mode
Press and hold the Control knob.
3
Select the Settings item
Turn the Control knob to select "Settings", and
then press the Control knob.
4
Select a desired Tuner setting item
Turn the Control knob to select Tuner setting
item, and then press the Control knob.
Display Description
"Settings"
"Seek Mode" Sets the tuning mode of the Radio.
Auto1: Automatic search for a station.
Auto2: Search in order of the stations in the
Manual: Normal manual tuning.
"MONO" You can reduce the noise when stereo
broadcasts are received as monaural.
"ON" / "OFF"
5
Select a setting and determine it
Turn the Control knob to select a desired value,
and then press the Control knob.
The previous item is displayed.
6
Exit the Function setting mode
Press and hold the [
preset memory.
( : Factory setting)
] button.