Table of Contents
Advertisement
Backing Keyboard BK-5 OR
Rhythm functions
4.
Use the [CURSOR÷VALUE] dial to modify the
tuning of the selected note.
Setting range: –64~63 cents.
Saving and loading your tunings (MEMORY)
After setting the desired tunings, you can save them to
one of the three MEMORY locations and recall them
whenever you need them. Here's what you need to do:
1.
Tune the notes to your liking (see p. 35).
2.
Press and hold the MEMORY button ([1]~
[3]) that corresponds to the memory where
you wish to save your tuning settings.
3.
Wait until all three MEMORY indicators
briefly light, then release the button you
pressed.
If necessary, you can now select another, Scale mem-
ory by briefly pressing the MEMORY button assigned
to the settings you wish to use.
To return to the tuning you were using before select-
ing a memory, press the MEMORY button in question
again so that its indicator goes dark, and/or switch
off all USER SCALE buttons whose indicators light.
In the second case, the MEMORY indicator of the last
memory you selected starts flashing to signal that
the current USER SCALE settings no longer corre-
spond to the ones of the last memory you select. I.e.
that memory is still selected, but has since been mod-
ified ("edited").
The USER SCALE settings are also saved to a Perfor-
mance memory (see p. 49) and therefore do not need
to be saved to one of the MEMORY areas. Whenever
you select a Performance memory whose scale set-
tings differ from the ones of the last memory you
selected, the corresponding button ([1]~[3]) starts
flashing.
36
When shipped, the BK-5 OR already contains fre-
quently used Scale Memory settings (see above).
NOTE
See also 48"Scale Tune Switch" on p. 65 for deciding which
sections should be affected by the Scale Tune settings.
Advertisement
Table of Contents
