Roland BK-5OR Owner's Manual page 71

Parameter Setting
Count In Off, 1bar, 2bar This parameter allows
[*] This setting is not memorized when you use "Save Global".
Video Settings
These parameters can be selected using [MENU] but-
ton‰ "Global" ‰ "Video Settings".
The following table shows the Video Setting parame-
ters.
Parameter Setting
Video Mode PAL, NTSC
Aspect Ratio Full, Center
NOTE
If you work with a TV set, do not forget to select the correct
channel ("AV" or something to that effect, see the manual
that came with your set).
Lyrics Settings
This page can be selected using [MENU] button ‰
"Global" ‰ "Lyrics Settings".
Explanation
you to switch the
Count-In function on
("1bar" or "2bar") or
off. When on, the met-
ronome will count in
the specified number
of measures (bars)
before the rhythm or
SMF song starts play-
ing. (This setting is not
available for audio
songs.)
Explanation
Select the setting that
corresponds to the for-
mat used by the con-
nected screen.
Specify the appropri-
ate aspect ratio for the
screen you are using.
Backing Keyboard BK-5 OR
The following table shows the "Lyrics Settings"
parameters.
Parameter Setting
Background Color, Logo,
Mode User
Background 1~8
Color
Highlight Color 1~8
Row Displaying 2, 4
Chord View Off, On
Utility
The "Utility" parameters are found on the display
page that can be selected using [MENU] button‰
"Global" ‰ "Utility".
The following table shows the utility parameters.
Parameter Setting
SMF Quick Start Off, 2nd Bar,
1st Note
r
'Global' parameters
Explanation
Color: The back-
ground is empty but
uses the selected color
(see below).
Logo: The BK-5 OR's
logo is shown as back-
ground.
User: The BK-5 OR
uses the selected .JPG
picture as background.
See xx.
Choose the back-
ground color.
Choose the highlight
color.
Allows you to specify
the number of lines to
be used for displaying
lyrics.
Select "On" if the
BK-5 OR should dis-
play chord symbols
along with the lyrics.
Explanation
Off: Playback starts at
the very beginning of
the song file (which
may contain a few
silent bars).
2nd Bar: Causes play-
back to start from
measure 2 of the
selected Standard MIDI
File.
1st Note: This is basi-
cally the same as the
above, except that
playback starts on the
first note of the
selected song.
71