Saving To The Memory Card - Roland V-Combo VR-760 Owner's Manual
Performance keyboard
Hide thumbs
Also See for V-Combo VR-760:
- Owner's manual (2 pages) ,
- System update (2 pages) ,
- Turbostart (2 pages)
Table of Contents
Advertisement
Using the Advanced Functions
Saving to the Memory Card
With the VR-760, you can take all of the content in the registration and the
system settings and save them as a single file to a memory card
(CompactFlash).
* When using memory cards, first turn the VR-760's power off, then insert the
memory card in the MEMORY CARD SLOT as shown in the figure below.
* Carefully insert the card in the direction indicated by the arrow.
* Make sure that the card is fully inserted in the slot.
fig.05-14(slot)
* Do not touch or allow metal to come into contact with the contact portion of the
cards.
* Never insert or remove a CompactFlash card while the VR-760's power is on.
Doing so may corrupt the VR-760's data or the data on the CompactFlash card.
* When using cards, make sure they are correctly oriented when inserted.
* For more information and precautionary notes on handling memory cards, refer to
the card manual.
* Be careful not to damage the contact portion of the cards.
* Cards are made to be insert in only one way. Do not force the cards into the slot.
* These cards are precision devices; do not bend or drop them or subject them to strong
shock or vibration.
* The cards cannot be altered or disassembled.
* These cards are precision devices; handle them carefully, and pay attention to
conditions of temperature and humidity. In particular, do not use in conditions
where water may condense on the surfaces.
* To prevent damage to the cards from static electricity, be sure to discharge any static
electricity from your own body before touching cards.
* Do not save data where static electricity or electrical noise is being generated.
* Do not place a card in any device if the card is dusty or dirty.
* Always be sure to back up the data on cards.
* Memory cards require formatting before they are used.
56
NOTE
Memory cards require
formatting before they are
used.
NOTE
Parameter settings are all
saved together in one file.
You cannot save or load
any one registration
individually.
Advertisement
Table of Contents
