Roland BK-5OR Owner's Manual page 96

Backing Keyboard BK-5 OR
Menu options
8.
Use the "From" and "To" parameters (3
each) to specify the beginning and end of
the excerpt you want to copy.
By default, the "From" parameters are set to "Bar 1,
Beat 1, CPT 0", while the "To" values are set to include
the entire track.
9.
Set "Location" to "Destination".
The following parameters are displayed:
Parameter Setting
Location Source, Desti-
nation
Track ADrums~Acc6,
ALL
Mode Major, Minor,
7th, ALL
Division Intro 1~4,
Main 1~4, Fill
Dwn 1~3, Fill
Up 1~3, End
1~4
Into Bar The" Into" position indicates where the
Into Beat beginning of the source excerpt will be
Into CPT after the copy operation. To copy the
source data to the beginning of the
destination track, select BAR= "1",
BEAT= "1" and CPT= "0".
Copy Mode Replace
Mix
Copy Times 1~999
96
10.
11.
12.
Explanation
13.
Allows you to select
the rhythm whose
tracks you wish to
copy ("Source") to
another rhythm ("Des-
14.
tination").
Allows you to select
15.
the track you wish to
edit. Select "ALL" only
to replace all tracks.
16.
Allows you to select
the Mode to be edited.
Use this parameter to
select the Division you
want to edit.
The data in the
selected range of the
source track overwrite
the destination track.
The data in the
selected range of the
source track are added
to the data on the des-
tination track.
Allows you to to spec-
ify the number of cop-
ies to be made. Select
"1" to copy the excerpt
only once.
Set "Copy Mode" to "Replace" or "Mix".
In either case, the length of the destination track may
change to include all data of the source track.
Use the [CURSOR÷VALUE] dial and [ENTER/
SELECT] button to set "Track" to the track
you wish to copy the data to.
NOTE
AccDrums data can also be copied to other tracks (prefera-
bly Acc1~Acc6). You can only copy ABass data to other
ABass tracks. If you selected "ALL" for "Source – Track", this
"Track" parameter is also set to "ALL".
Repeat this operation with the "Mode"
(Major, Minor, 7th, ALL) and "Division"
parameters (Intro 1~4, Main 1~4, Fill Dwn
1~3, Fill Up 1~3, End 1~4, ALL).
NOTE
If you selected "ALL" for "Source – Mode" or "Source – Divi-
sion", this "Mode" or "Division" parameter is also set to
"ALL".
Use the [CURSOR÷VALUE] dial and [ENTER/
SELECT] button to select "Copy Times" and
specify the number of copies you need.
Select "1" to copy the excerpt only once.
Press the [KEY] button to audition the desti-
nation track.
Use the [CURSOR÷VALUE] dial and [ENTER/
SELECT] button to specify the target posi-
tion using the three "Into" parameters.
Press the [WRITE] button (its indicator
flashes) to confirm your settings and edit
the data.
Insert
"Insert" allows you to insert space and shift data that
lie behind the "From" position further towards the
end of the track (this is the exact opposite of
"Delete"). The empty measures you create can be
"filled" using the "Copy" function or by recording new
phrases in that area.