Table of Contents
Advertisement
4.
Wait until you reach the end of the passage
to be played back in a loop, then press the
VARIATION [4] button.
The VARIATION [4] button lights, while VARIATION [3]
keeps flashing. The loop's start and end positions
have been set and can be used.
Here is what you have set so far (this is only an
example):
Flashes
[3]
5.
Press the VARIATION [3] button (it lights) to
activate the loop.
The passage selected above is now played back over
and over.
Lights
[3]
:
6.
Press the VARIATION [3] button again (it
flashes) to deactivate loop playback.
This does not delete the loop positions. The song is
once again played back in the usual way (i.e. until the
end).
7.
Press VARIATION [3] yet again (it lights) to
return to the loop start position and activate
the loop.
NOTE
The marker positions are deleted when you start playback
of another song or switch off the BK-5 OR.
8.
To delete the first and second marker posi-
tions, press the VARIATION [4] button.
The VARIATION [3] and [4] buttons go dark and your
loop setting is deleted.
Lights
[4]
:
Backing Keyboard BK-5 OR
Loop function (MARK A/B)
r
43
Advertisement
Table of Contents
