Checking And Changing Print Jobs - Canon imageRunner 5075 Manual

Checking and Changing Print Jobs

This section describes the procedures for the job processes listed below.
Canceling Print Jobs (See p. 2-12.)
Canceling All Operations (Reset Printer) (See p. 2-17.)
Temporarily Stopping Print Jobs (See p. 2-18.)
Form Feeding Print Data (See p. 2-21.)
Skipping an Error during Printing (See p. 2-25.)
Printing Secured Documents (See p. 2-28.)
Printing Encrypted Secured Documents (See p. 2-33.)
IMPORTANT
You can restrict the display of the System Monitor screen under the following conditions
if "Display Status Before Authentication" in System Settings (from the Additional
Functions screen) is set to [Off]. (The default setting is [On].)
When "Display Status Before Authentication" is set to [Off]
: Displayed
: Not Displayed
✗
Login service
(Department ID
Management, SSO, SDL,
Before logging in
After logging in
Even if you set the 'Display Status Before Authentication' mode to [Off], access to the System Monitor screen is
*
only restricted if a login service is set.
You can receive print jobs only for encrypted secured documents with this machine if
"Only Allow Encrypted Secured Jobs" in System Settings (from the Additional Functions
screen) is set to [On]. A job will be canceled and an error message displayed if a print job
other than an encrypted secured print job is received. (The default setting is [Off].)
Print, Copy, Send, Fax,
and Receive screens
etc.)
System Monitor screen
Device Status screen
✗

Checking and Changing Print Jobs

2
2-11