Canon imageRunner 5075 Manual page 176

PDL PDF Font Error
Cause
Remedy 1 After canceling the print job, try printing again with PDF data that is compatible
Remedy 2 Perform [Error Skip] and continue printing. However, the data will not be printed
NOTE
If 'Auto Continue' is set to [On], this error is skipped automatically. (See "Auto Continue,"
on p. 3-21.)
PDL PDF HDD Access Error
Cause
Remedy
6
PDL PDF Initialize Error
Cause
Remedy
PDL PDF Memory Full
Cause
Remedy 1 After canceling the print job, reset the printer to increase the amount of
Remedy 2 Perform [Error Skip] and continue printing. However, the data will not be printed
6-8
When a Message Is Displayed
There is font in the PDF data that cannot be processed.
with the machine.
correctly.
An error occurred while the hard disk was loading in PDF 1.5 Mode.
Reset the printer to increase the amount of available memory and print again.
(Note that all the data stored in the memory that was received by the machine
will be deleted.) (See "Reset Printer," on p. 3-62.)
An error occurred when the PDF file started printing.
Reset the printer to increase the amount of available memory and print again.
(Note that all the data stored in the memory that was received by the machine
will be deleted.) (See "Reset Printer," on p. 3-62.)
The machine's memory space allocated for PDF1.5 is full and printing cannot
proceed.
available memory and print again. (Note that all the data stored in the memory
that was received by the machine will be deleted.) (See "Reset Printer," on p.
3-62.)
correctly.
Error Skip
Error Skip