Fold Type - Canon imageRunner 5075 Manual

Fold Type

Off * , Z-Fold, and C-Fold
This setting selects whether the printouts should be Z-Folded or C-Folded.
[Z-Fold]
This setting enables you to specify that the printouts should be Z-folded.
1
2
IMPORTANT
Paper with a Z-fold may be wrinkled depending on the type of paper and the
environment used.
You cannot use this setting in combination with 'Booklet', 'Saddle Stitch',
[Rotate+Collate], or [Rotate+Group].
NOTE
This function is available for selection if the Document Insertion/Folding Unit-F1 is
attached to the Saddle Finisher-AD2.
You can select Z-fold for the following paper sizes and types:
- Paper sizes: 11" x 17", LGL, LTRR, A3, JIS-B4, or A4R
- Paper types: Plain Paper, Recycled Paper, or Color Paper
The maximum number of sheets that can be output to the paper trays is 40.
If you use this setting in combination with [Staple+Collate] or [Staple+Group], the
maximum number of sheets that can be stapled is 10. If the number of sheets is
greater than this, they will be collated, but not stapled.
You can adjust the width to fold paper with [Z-Fold Placement Adjustment] in
Adjustment/Cleaning settings (from the Additional Functions screen). For details
on this setting, see the Reference Guide.
3
4
3-35
Settings Menu
3