Copy Set Numbering - Canon imageRunner 5075 Manual

Copy Set Numbering

Copy Set Numbering

On, Off *
This setting enables you to print documents with a five digit serial number in the
background on each copy.
Copy numbers are printed in the following methods:
00001 00001
00001
00001 00001
When printing three copies of a five page document:
First Copy
00001 00001
00001 00001
00001 00001
00001
00001 00001
00001
00001 00001
00001
00001 00001
00001
00001 00001
00001
00001 00001
00001 00001
00001 00001
IMPORTANT
If this setting is used in combination with [Forced Secure Watermark Mode (print)]
in System Settings (from the Additional Functions screen), this setting is invalid.
For details on the Forced Secure Watermark Mode function, see Chapter 6,
"System Manager Settings," in the Reference Guide.
If the 'Finishing' settings are specified as [Rotate+Group], [Offset+Group], and
[Staple+Group], then [Rotate+Collate], [Offset+Collate], and [Staple+Collate] are
specified.
NOTE
If the copy number has fewer than five digits, the machine prints it as follows:
- Example: If the copy number is 10
10 00010
Copy numbers are not printed on blank pages (pages with no data).
If this setting is used in combination with 'Margin' or 'Offset Short Edge/Offset Long
Edge', part of the copy number may be cut off.
This function is not available if 'Transparency Interleaving' is enabled.
Copy Number
00001
Second Copy Third Copy
00002 00002 00003
00002 00002 00003
00002 00002 00003
00002 00003
00002 00002
00002
00002 00002
00002
00002 00002 00003
00002
00002 00002 00003
00002
00002 00002 00003
00002 00002
00002 00002
00003
00003
00003
00003 00003
00003
00003 00003
00003
00003
00003
00003
00003
00003
00003 00003
00003 00003
Settings Menu
3
3-39