Y Dimension; Append Cr To Lf - Canon imageRunner 5075 Manual

Y dimension

3.89 to 11.69 inches; 11.69
This setting enables you to specify the Y dimension of the custom paper. The Y
dimension can be adjusted from 3.89" (99 mm) through 11.69" (297 mm) in
increments of 0.01" (1 mm).
This function can be very useful when part of the printed image is cut off.
Increasing this dimension may allow some of the missing text to be correctly
printed. Make sure you do not increase the Y dimension beyond the actual size of
the paper you are using for printing.

Append CR to LF

Yes, No
*
This setting enables you to specify whether to append a carriage return (CR)
when line feed code (LF) is received.
If [Yes] is selected, the print head moves to the beginning of the next line when
line feed code is received.
If [No] is selected, the print head moves down to the next line when line feed code
is received, and the margin does not change (such as to the beginning of the next
line).
ABCDE
FGHIJ
Append CR to LF [Yes]
* inches
ABCDE ↓ FGHIJ
LF code ( ↓ ) only
ABCDE
Append CR to LF [No]
FGHIJ
PCL Settings
3
3-49