Removing The Thermal Cutout - Kyocera KM-1820 Service Manual

(5) Removing the thermal cutout

CAUTION
• Do not bend the terminals of the thermal cutout.
1. Remove and split the fuser unit (see page 1-6-18).
2. Remove the heater lamp (see page 1-6-21).
3. Remove the heat roller (see page 1-6-22).
4. Remove two screws.
5. Remove the thermal cutout.
Screws
Thermal
cutout
Figure 1-6-28 Removing the thermal cutout
2GM
1-6-25