1-3-1 Maintenance mode
The machine is equipped with a maintenance function which can be used to maintain and service the machine.
(1) Executing a maintenance item
Start
Press the system menu/counter key.
Select Service setting using
the up/down cursor keys.
While pressing the start key and the # key,
press the enter key.
Select Maintenance mode using
the up/down cursor keys.
Press the enter key.
Enter the maintenance item
number using the up/down keys.
Press the enter key.
The selected maintenance item is run.
Press the back key.
Yes
Repeat the same
maintenance item?
No
Yes
Run another maintenance
item?
Turning power switch off and back on
End
No
Maintenance mode is entered.
The maintenance item is
selected.
Maintenance mode is exited.
3JG
1-3-1