Removing The Laser Scanner Unit And The Eraser Lamp - Kyocera KM-1820 Service Manual

1-6-11 Removing the laser scanner unit and the eraser lamp

1. Remove the scanner unit (see page 1-6-27).
2. Remove two screws and then remove
grounding plate.
3. Remove each two screws and then remove
the right and left scanner stays.
Screws
Right scanner stay
4. Remove four connectors.
5. Remove six screws and then remove the LSU
shield.
* When refitting the LSU shield, tighten a
screw in order of 4 from 1.
Left scanner stay
Figure 1-6-32 Removing the right and left stays
Connectors
Screws
Screws
4
3
1
Screw
Figure 1-6-33 Removing the LSU shield
Grounding plates
Screws
Screw
LSU shield
2
Screws
2GM
1-6-29