Battery; Door Holder Ac Input; Output Relays - Honeywell NOTIFIER IFS-2600 Technical Installation Manual

Fire indicator panel
Table of Contents

Advertisement

IFS-2600 Installation & Programming Manual

BATTERY

The 24V batteries are connected at these terminals.
damage to the equipment.

DOOR HOLDER AC INPUT

Terminate the door holder AC transformer at these terminals. 24 VAC is the only acceptable power source at
this point. DO NOT connect 240VAC at this point.

OUTPUT RELAYS

STANDBY (N) Normally energised, drops out when power supply (or battery supply) is below specified
voltage.
BRIGADE1
Brigade 1, defaults as energising on any alarm zone, programmable.
BRIGADE2
Brigade 2, defaults as energising on any alarm zone, programmable.
FAULT (N)
Normally energised, drops out on any fault unless that function is isolated.
AC-FAIL (N)
Normally energised, drops out if the mains power is lost.
ISOLATE
Energised if any zone is isolated.
GENERAL1
Energised if any zone goes into alarm
GENERAL2
Energised if any zone goes into alarm
P/N 10069 ECN08-0066
Reverse polarity will cause serious and permanent
Page 45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents