Print Programming Data; Time (Date & Time) - Honeywell NOTIFIER IFS-2600 Technical Installation Manual

IFS-2600 Installation & Programming Manual
Then relay #1 would be set as MAP OR with its mapping as (09) 00 00 00 00, relay #2 would be set as MAP
OR with it's mapping set as (10) 00 00 00 00 and so on all the way up to relay #64.
Note: In example 2, zone number 64 is reached and there are still more relays to go. (I.e. we are only at
relay #56) the programming stops at this point and any relays not yet programmed will be left in their
previous programmed mode and are unaffected by this function.

PRINT PROGRAMMING DATA

Prints the programming data currently stored in RAM, including all changes made (they may have not yet been
written to the E2ROM).
Output is printed directly onto the serial printer if fitted.
TIME (DATE & TIME)
The current DATE & TIME will be displayed as DD/MM/YY (in 24h format)
Use the PREVIOUS" & NEXT" keys to increment or decrement the number highlighted by brackets.
The ENTER key will move to the next field.
When finished, the SELECT key must be pushed to store the date/time.
Note:
The Date/Time data is saved when the Select key is pushed.
DO NOT select "Save Changes "Y" as this will restart (and drop any door holders / air-
conditioning if connected).
P/N 10069 ECN08-0066
Page 35