How To Stabilize The Life Fitness Treadmill - Life Fitness 9000 Operation Manual

How to Stabilize the Life Fitness Treadmill

When deciding where to place the Life Fitness treadmill, please pay close attention to the following:
Do not place the sides of the treadmill closer than eight (8) inches or 20 centimeters,
l
from any electrical device, including any other electrical exercise equipment.
Do not locate the treadmill near swimming pools or in areas of high humidity.
l
Do not place the treadmill in such a manner that the power cord runs beneath the
l
frame or near the wheels of the unit.
After placing the unit where it will be used, check its stability.
If there is even a slight rocking motion or the unit is not
stable, loosen the JAM NUT (A), if so equipped, on the
stabilizing leg located on the user's back right side of the
machine (as the user faces the console). Turn the
STABILIZING LEG until the rocking motion ceases.
Retighten the JAM NUT.
NOTE: It is extremely important that the treadmill stabilizing leg be correctly adjusted
for proper operation. An unbalanced unit may cause striding belt misalignment.
Power Safety Switch for Life Fitness Treadmills
The Power Safety Key is one of the many safety features of the Life
Fitness treadmill. This allows you to be certain the treadmill is used only
in a supervised manner. Removing the Power Safety Key mechanically
locks the switch in the OFF position.
The Power Safety Key should be removed while you are not using the
treadmill to avoid unauthorized persons from doing so.
Remember to store the Power Safety Key out of the reach of children.
Remove power switch safety key when not in use and store out of
reach of children.
8