Configuring Learned Port Security
Displaying Learned Port Security Information
To display LPS port and table information, use the show commands listed below:
show port-security
show port-security shutdown
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide. An example of the output for the show port-security and show port-security shutdown
commands is also given in
OmniSwitch 6600 Family Network Configuration Guide
Displays Learned Port Security configuration values as well as
MAC addresses learned on the port.
Displays the current time limit value set for source learning on all
LPS enabled ports.
"Sample Learned Port Security Configuration" on page
April 2006
Displaying Learned Port Security Information
3-3.
page 3-11