Verifying the ACL Configuration
Verifying the ACL Configuration
To display information about ACLs, use the same show commands that are used for displaying any QoS
policies. These commands include:
show policy condition
show policy action
show policy rule
show active policy rule
When a show command is used to display output for all pending and applied policy configuration, the
following characters may appear in the display:
character definition
+
Indicates that the policy rule has been modified or has
been created since the last qos apply.
-
Indicates the policy object is pending deletion.
#
Indicates that the policy object differs between the pend-
ing/applied objects.
The following example shows all policy rules configured on the switch:
-> show policy rule
my_rule
Cnd/Act:
+my_rule5
Cnd/Act:
mac1
Cnd/Act:
The display indicates that my_rule is inactive and is not used to classify traffic on the switch (the Inact
field displays Yes). The rule my_rule5 has been configured since the last qos apply command was
entered, as indicated by the plus (+) sign. The rule will not be used to classify traffic until the next qos
apply. Only mac1 is actively being used on the switch to classify traffic.
page 25-22
Displays information about all pending and applied policy conditions or
a particular policy condition configured on the switch. Use the applied
keyword to display information about applied conditions only.
Displays information about all pending and applied policy actions or a
particular policy action configured on the switch. Use the applied key-
word to display information about applied actions only.
Displays information about all pending and applied policy rules or a par-
ticular policy rule.
Displays the pending and applied policy rules that are active (enabled)
on the switch.
Policy
From Prec
cli
cond5 -> action2
cli
cond2 -> pri2
cli
dmac1 -> pri2
OmniSwitch 6600 Family Network Configuration Guide
Enab Inact Refl Log Save
0
Yes
Yes
No
0
Yes
No
No
0
Yes
No
No
Configuring ACLs
No
Yes
No
Yes
No
Yes
April 2006