Diagnosing Switch Problems
Deleting A Mirroring Session
The no form of the
port mirroring
configuration between a mirrored port and a mirroring port.
To delete a mirroring session, enter the no port mirroring command, followed by the port mirroring
session ID number. For example:
-> no port mirroring 6
In this example, port mirroring session 6 is deleted.
Note. The port mirroring session identifier must always be specified.
OmniSwitch 6600 Family Network Configuration Guide
command can be used to delete a previously created mirroring session
April 2006
Port Mirroring
page 27-19