Alcatel OmniSwitch 6600 Family Network Configuration Manual page 541

Configuring ACLs
Important. If you set the global bridged disposition (using the qos default bridged disposition
command) to deny or drop, it will result in dropping all Layer 2 traffic from the switch that does not
match any policy to accept traffic. You must create policies (one for source and one for destination) to
allow Layer 2 traffic on the switch.
If you set the bridged disposition to deny or drop, and you configure Layer 2 ACLs, you will need two
rules for each type of filter. For more information, see
OmniSwitch 6600 Family Network Configuration Guide
"Layer 2 ACLs" on page
April 2006
Setting the Global Disposition
25-12.
page 25-9