Configuring ACLs
To filter multicast clients, specify the multicast IP address, which is the address of the multicast group or
stream, and specify the client IP address, VLAN, MAC address, or slot/port. For example:
-> qos default multicast disposition deny
-> policy condition Mclient1 multicast ip 224.0.1.2 destination vlan 5
-> policy action ok disposition accept
-> policy rule Mrule condition Mclient1 action ok
In this example, any traffic coming in on VLAN 5 requesting membership to the 224.0.1.2 multicast group
will be allowed.
page 25-16
OmniSwitch 6600 Family Network Configuration Guide
Configuring ACLs
April 2006