VRRP Specifications
VRRP Specifications
RFCs Supported
Compatible with HSRP?
Maximum number of virtual routers
Maximum number of IP addresses
VRRP Defaults
The following table lists the defaults for VRRP configuration through the
command keywords:
Description
Virtual router enabled or dis-
abled
Priority
Preempt mode
Advertising interval
In addition, other defaults for VRRP include:
Description
VRRP traps
VRRP tracking
VRRP delay
page 19-2
RFC 2338–Virtual Router Redundancy Protocol
RFC 2787–Definitions of Managed Objects for the Virtual
Router Redundancy Protocol
No
7
1 for the IP address owner; more than 1 address may be
configured if the router is a backup for a master router that
supports multiple addresses
Keyword
enable | disable | on | off
priority
preempt | no preempt
advertising] interval
Command
vrrp trap
vrrp track
vrrp delay
OmniSwitch 6600 Family Network Configuration Guide
Configuring VRRP
vrrp
command and the relevant
Default
Virtual routers are disabled (off).
100
Preempt mode is enabled.
1 second
Default
Disabled
Enabled
45 seconds
April 2006