Alcatel OmniSwitch 6600 Family Network Configuration Manual page 461

Configuring 802.1X
The order in which policies are applied to client traffic is determined by the order in which the policy was
configured. For example, if a compound non-supplicant policy is configured by specifying MAC authenti-
cation, Group Mobility rules, and default VLAN, then the policies are applied in the following sequence:
1 MAC authentication is performed.
2 If authentication was successful and provided a VLAN ID, the client is assigned to that VLAN and no
further policies are applied.
3 If a VLAN ID was not provided or authentication failed, then Group Mobility rules are applied.
4
If there are no Group Mobility rules that match the client traffic, then the device is learned in the
default VLAN for the port.
See "Configuring Access Guardian Policies" on page 22-14
configure policies.
OmniSwitch 6600 Family Network Configuration Guide
for more information about how to use and
April 2006
Using Access Guardian Policies
page 22-9