Cable Your Router - NETGEAR JWNR2010v5 N300 User Manual

Cable Your Router

The installation guide that came in the box has a cabling diagram on the first page. This
section describes how to connect the router, the computer, and the cable or DSL broadband
modem, and provides detailed illustrations.
1. Unplug and turn off the cable or DSL broadband modem.
2. If your modem has a backup battery, remove it.
3. Locate the Ethernet cable (
4. Disconnect the cable from the modem (
You connect it to the router later.
5. Insert an Ethernet cable into your modem and into the router's Internet port.
JWNR2010v5 N300 Wireless Router
) that connects your computer to the modem.
1
1
2
).
2
(Not included)
Hardware Setup
13