Erase Configuration Settings - NETGEAR JWNR2010v5 N300 User Manual

Erase Configuration Settings

Under some circumstances (for example, if you move the router to a different network), you
might want to erase the configuration and restore the factory default settings.
You can either use the Restore Factory Settings button on the back of the router (see
Settings on page 88), or you can use the Erase button on the Backup Settings screen.
To erase the configuration and restore the factory default settings:

1. Log in to the router.
For more information, see
2. Select ADVANCED > Administration > Backup Settings.
The Backup Settings screen displays.
3. Click the Erase button.
4. To confirm the action click the Yes button.
The router reboots.
WARNING:
Do not interrupt the reboot process.
Erasing sets the user name to admin, the password to password, and the LAN IP address to
192.168.1.1, and enables the router's DHCP server.
JWNR2010v5 N300 Wireless Router
Log In to Your Router After Installation
Administration
55
Factory
on page 18.