Selecting The Type Of Originals; Selecting The Color Mode - Samsung CLX-9252 9352 Series User Manual

To recieve the job completion notification, you need to set up network
parameters and email settings using the control panel or SyncThru™
Web Service. For details about how to set up the network parameters
and email settings, refer to the Administrator's Guide on the supplied
CD.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2. Press Scan to Email or Scan to Server from the display screen.
3. Set scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 96).
4. Enter the destinations information.
5. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 96 and "Changing the resolution" on
page 96).
6. Press the Advanced tab > Job Completion Notification.
7. Press On to activate this feature.
8. Press Email Address input area. The pop-up keyboard appears.
Enter the email address which you want to recieve the job completion
notification. Press OK.
• You can select the email address pressing Address Book.
• You can enter an email address only.
9. Press OK from the display screen.
10. Press Start on the control panel to begin scanning.

Selecting the type of originals

The original type setting is used to improve the scan quality by selecting the
document type for the current scanning job.
1. Press the Image tab > Original Type from the display screen.
2. Press the appropriate option.
• Text: Use for originals containing mostly text.
• Text/Photo: Use for originals with mixed text and photographs.
• Photo: Use when originals are photographs.
3. Press OK from the display screen.

Selecting the color mode

Use one of these options to scan the original among Auto, Color, Gray or
Mono.
1. Press the Image tab > Color Mode from the display screen. Select the
appropriate option and press OK.
2. Press the appropriate option.
• Auto : Automatically detects the color of the original and scan it.
• Color: Uses color to display an image. 24 bits per pixel, 8 bits for
each RGB, is used for 1 pixel.
• Gray: Uses the black gradation to display an image. 8 bits per pixel.
• Mono: Displays an image in black and white. 1 bit per pixel.
3. Press OK from the display screen.
Scanning_ 99