Saving Documents - Samsung CLX-9252 9352 Series User Manual

For example, if you want to use the settings from the last job, press
Previous 1.
5. Press OK.
6. Press Yes when the confirmation window appears.
The machine is now set to scan according to the setting you selected.
7. Press the Start button to scan and send the file.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
• To cancel the current scan job, press Stop on the control panel. Or
you can delete current and pending jobs using Job Status on the
control panel. Select the job you want to cancel and press Delete
(see "Job Status button" on page 30).
• While the machine is sending an email, you cannot use the
machine to copy or to send a fax.

Saving documents

You can save the scanned originals to Document Box (the machine's
HDD) in your machine. The documents saved in Document Box can be
printed, if necessary.
• For details about how to use the Document Box, refer to the
Document Box chapter (see "Document box" on page 167).
• If important data is stored in the Document Box, we recommend
you to backup the data regulary. Samsung disclaims all
responsibility for damage or loss of data caused by misuse or
failure of the machine.
• Scan to USB is not supported the Save Document feature.
1. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
2. Press Scan to Email or Scan to Server from the display screen.
3. Set scan features in the Advanced, Image, or Output tabs (see
"Changing the scan feature settings" on page 96).
4. Press the Basic tab. Then you need to enter the each item using the
pop-up keyboard.
5. Set the scan quality by Duplex and Resolution (see "Scanning from
both sides of originals" on page 96 and "Changing the resolution" on
page 96).
6. Press Save Document.
7. Press Send&Store or Store only.
• Off: Disables this option.
• Send&Store: Sends and stores scanned originals.
• Store only: Stores scanned originals only.
8. Press File Name input area. Then the pop-up keyboard appears.
Enter the file name you want. Press OK.
9. Select a destination box and press OK.
10. Press Start from the control panel to begin scan and send the file and
storing, or storing only.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
• To cancel the current scan job, press Stop on the control panel.
You can also delete current and pending jobs using Job Status on
the control panel. Select the job you want to cancel and press
Delete (see "Job Status button" on page 30).
• While the machine is sending an email, you cannot use the
machine to copy or to send a fax.
Scanning_ 104