Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Samsung SCX-8230NA
Summary of Contents for Samsung SCX-8230NA
- Page 2 This user’s guide is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this user’s guide.
- Page 3 Copyright_ 2...
-
Page 4: Table Of Contents
Contentds ABOUT THIS INSTALLATION GUIDE SETTING UP THE HARDWARE Installation environment ..........7 Machine configuration . - Page 5 A bout this installation guide This installation guide provides information about the installation of the machine as well as detailed explanation on how to install with step-by-step instructions. This installation guide is valuable for both novice and professional users. You can refer to this as a guide for installing and setting up the machine.
-
Page 6: Setting Up The Hardware
S etting up the hardware We recommend you leave to setting up the hardware to the installation engineer from Samsung or the dealership where you bought the machine. This chapter gives you step-by-step instructions for setting up the hardware. We recommend you set up the hardware following the order in this chapter. - Page 7 The body of this machine weighs about 113.4 Kg (250.00 lbs) to the maximum including the trays. Use safe lifting and handling techniques. If you need to move this machine, you need at least four people. Use the lifting handles, as shown. If less than four people attempt to lift the machine, you can sustain back injury. Setting up the hardware_ 6...
-
Page 8: Installation Environment
Installation environment Make sure to have the below recommended environment before you install the machine. • Range of temperature Operation: 10 and 32 °C (50 and 90 °F) Storage: -20 and 40°C (-4 and 104 °F) • Range of humidity Operation: 20 and 80% RH Storage: 10 and 90% RH •... -
Page 9: Machine Configuration
Machine configuration Setting up the hardware_ 8... -
Page 10: Optional Goods By Models
Optional goods by models The machine is designed to support all of your document needs from printing and copying to more advanced networking solutions for your business. Some optional goods may not be available depending on models or countries. Optional goods by models include: CLX-9252 SERIES SCX-8230 SERIES OPTIONAL GOODS... -
Page 11: Installation Flow Of The Hardware
Installation flow of the hardware We recommend you refer to the below installation flow to install the hardware. Set installation location and check included items in the package. Remove all the packing pads and tapes. Install the machine with the one of the purchased items : Cabinet Stand, Dual Cassette Feeder, or High Capacity Feeder. -
Page 12: Unpacking And Placing The Hardware
Unpacking and placing the hardware Follow the steps below: 1. Select a stable location. 2. Unpack the machine and check all the enclosed items. Included items may differ depending on the country TONER CARTRIDGE IMAGING UNIT CLX-9252/9352 Series CLX-9252/9352 Series SCX-8230/8240 Series SCX-8230/8240 Series POWER CORD &... -
Page 13: Ity Feeder
Installing the cabinet stand, optional dual cassette feeder or optional high capacity feeder When you purchased this machine, you would have chosen one of the below items. To install the item, refer to its installation guide. CABINET STAND DUAL CASSETTE FEEDER HIGH CAPACITY FEEDER Setting up the hardware_ 12... -
Page 14: Removing The Scanner Locking Screw
Removing the scanner locking screw You need to remove the screw locking the scanner. If you do not remove it, you cannot use the copy and scan functions. We recommend you keep the screw in the accessory box. You need to lock the scanner when moving the machine or when the machine is not in use for a long time. -
Page 15: Installing The Toner Cartridges
Installing the toner cartridges Follow the steps below: 1. Open the front cover. SCX-8230/8238NA/8240/8248NA Series CLX-9252/9258NA/9352/9358NA Series 2. Take the new toner cartridges out from their packages. 3. Thoroughly shake the new toner cartridge side to side five or six times to distribute the toner evenly inside the toner cartridge. - Page 16 If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. 5. Hold the new toner cartridge by the handle and slide it into its corresponding positions until it locks into place. Leave the front cover opened.
-
Page 17: Installing The Imaging Units
Installing the imaging units Follow the steps below: CLX-9252/9352 Series 1. Squeeze the left/right locking levers and push outward at the same time. Then remove the waste toner container. 2. Squeeze and push down the lever, and open the inner cover. Setting up the hardware_ 16... - Page 18 3. Take the new imaging units out from their packages. Do not use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit. 4. Remove the paper protecting the surface of the imaging unit. 5.
- Page 19 6. Hold the shutter, and pull the rubber stopper out of the developer. 7. Remove the tape wrapped around the developer. 8. Remove the tape on the imaging uint. 9. Pull out the OPC protecting pad. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.
- Page 20 • Be careful not to scratch the surface of the imaging unit. • To prevent damage, do not expose the imaging unit to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. 10.
- Page 21 12. Insert the waste toner container until it locks in place. 13. Close the front cover. If the front cover is not completely closed, the machine will not operate. Setting up the hardware_ 20...
-
Page 22: Scx-8230/8240 Series
SCX-8230/8240 Series 1. Lift the locking lever upward. Then remove the waste toner container. Setting up the hardware_ 21... - Page 23 2. Open the right door. 3. Remove the new imaging units from its package. Do not use sharp objects, such as a knife or scissors, to open the imaging unit package. You could damage the surface of the imaging unit. Setting up the hardware_ 22...
- Page 24 4. Pull out the OPC protecting pad. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. • Be careful not to scratch the surface of the imaging unit. •...
- Page 25 7. Remove the paper protecting the surface of the imaging unit. 8. Hold the handles on the new imaging unit, and push the imaging unit until it locks into place Setting up the hardware_ 24...
- Page 26 9. Close the right door. 10. Insert the waste toner container until it locks in place. Setting up the hardware_ 25...
-
Page 27: Installing Other Options
This machine is a full-featured multi function printer that has been optimized to meet most of the users needs. Recognizing that each user may have different requirements, Samsung makes many options available to enhance the machine’s capabilities. Refer to Supplies and Accessories guide on the User’s Guide CD. -
Page 28: Loading Paper
Loading paper Standard tray Load the print media you use for the majority of your print jobs into standard tray. You can also purchase an optional dual cassette feeder or optional high capacity feeder, and attach it below the standard tray. - Page 29 3. Squeeze the paper length guide, and slide it to the end of the tray. Paper length guide 4. Squeeze the paper width guide, and slide it to the end of the tray. Paper width guide 5. Flex or fan the edge of the paper stack to separate the pages before loading papers. When handling the paper, be careful not to get a paper cut.
- Page 30 6. Load paper with the print side facing up. 7. Adjust the paper legnth guide to the desired paper length. Setting up the hardware_ 29...
- Page 31 8. After loading paper into the tray, pinch the paper width guide and move it toward the stack of paper until it lightly touches the side of the stack. Do not press the guide too tightly to the edge of the paper; the guide may bend the paper.
- Page 32 9. Fix the paper length guide using the locking switch. Release the locking switch to load a different sized paper Locking switch 10. Insert the tray back into the machine. • When you load special type of paper such as thick paper, transparency, etc, you need to set the paper type to improve the quality of your printed documents.
-
Page 33: Connecting A Printer Cable
Connecting a printer cable Using a network cable This machine has a bulit-in network interface card. You can connect your machine to a network using a network cable. Connect your machine to the network with a network cable: Setting up the hardware_ 32... -
Page 34: Turning The Machine On
Turning the machine on Keep in mind that you should use the power cord supplied with the machine. Otherwise, it can cause damage or fire to the machine. 1. Plug the power cord into the power receptacle. 2. Plug another side into a properly grounded AC outlet. Setting up the hardware_ 33... - Page 35 3. Turn on the power switch. • Some parts inside of the machine may be hot when power is on, or after printing. Be careful not to burn yourself when working inside the machine. • Do not disassemble the machine when it is turned on or plugged in. Doing so may give you an electric shock.
-
Page 36: Initial Settings And Testing Of The Machine
I nitial settings and testing of the machine After hardware installation is completed, initial settings and some tests are necessary before using the machine. This chapter gives you step-by-step instructions for initial settings and tests. For detailed information about setting up the machine, refer to the User’s Guide or Administrator’s Guide on the User’s Guide CD. - Page 37 3. Press the Device name input area. The pop-up keyboard appears. Remove the existing device name and enter the device name you want to use and then press OK. Then press Next. Keep in mind to enter the device name to be used on the network. •...
- Page 38 5. Press Static and enter the IP address, subnet mask, and gateway in each input area using the pop-up keyboard or the numeric keypad on the control panel. Then press Next. • If a new IP address is assigned automatically by a DHCP or BOOTP, press DHCP or BOOTP. •...
- Page 39 7. Set the time on the machine. You can set the time manually or use SNTP (Simple Network Time Protocol) to set time automatically using the time server. When you press Manual: a. Set the date, time and time offset using the left/right and up/down arrows. Example for selecting the time offset: If your local time is 4 hours faster than UTC (Universal Time Coordinated), press the right arrow until +4 shows.
- Page 40 8. Select a unit, numeric separation, and standard paper size to be used on the display screen. Then press Next. 9. Select an altitude level where the machine is installed. The print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level.
- Page 41 10. Press Community Name input area. The pop-up keyboard appears, and then enter a SNMP Community name and press OK. Then set access permission using Read Access or Write Access. If you do not know SNMP Community, contact your network administrator. Then press Finish. If you want to skip this step, just press Finish.
-
Page 42: Print Adjustment (Dual Cassette Feeder Or High Capacity Feeder)
Print adjustment (Dual cassette feeder or High capacity feeder) If you have installed the dual cassette feeder or high capacity feeder on the machine, you have to print adjustment before using the machine. The procedure of print adjustment for both cassette feeders is same. The explanation in this user’s guide is based on the dual cassette feeder. - Page 43 7. Press Adjustment > Print Adjustment > Paper Supply > Tray. 8. Press Paper Size > A3 > Print. 9. The machine prints the print test chart. Press Next. Initial settings and testing of the machine_ 42...
- Page 44 10. Place the front of the print test chart face down on the scanner glass. The print test chart has A (Front Side) on the front page. 11. Press Start from the control panel. If you select Apply to all trays, the trays that are not selected also have the print adjustment results appllied. We recommend performing print adjustment for each tray individually to optimize each tray’s settings.
-
Page 45: Dadf Skew Test And Adjustment
DADF skew test and adjustment After initial setting is completed, you need to conduct the DADF skew test and adjustment using the DADF test chart which supplied with DADF. Skew test 1. Load the A4 (or LTR) DADF test chart face up into the DADF. 2. - Page 46 3. Press Copy from the display screen. 4. Press Start from the control panel to begin copying. 5. Compare the condition of the printout with the DADF test chart. For example, the length of scale marks in the circles is equivalent (acceptable range by less or more than 0.5 mm), it means the DADF was installed well.
- Page 47 Otherwise, adjust the DADF using the screw at the backside and handle hinge as shown by the examples below. Initial settings and testing of the machine_ 46...
-
Page 48: Dadf Adjustment
DADF adjustment 1. Load the A4 (or LTR) DADF test chart face up into the DADF. 2. Adjust the document width guides to the paper size. Initial settings and testing of the machine_ 47... - Page 49 3. Press Machine Setup from the display screen. 4. Press Machine Setup > General Settings > Machine Test. 5. Press ID’s input area. The pop-up keyboard appears. Enter the name which is entered in the initial setting step 6 (See "Press the Name input area." on page 37). Then press OK on the pop-up keyboard.
- Page 50 9. Press Adjustment > DADF Adjustment > OK. The machine adjusts the DADF automatically. After the DADF skew test and adjustment, the pop-up window appears on the display screen. Remove the the A4 (or LTR) DADF test chart from the DADF. Initial settings and testing of the machine_ 49...
- Page 51 Initial settings and testing of the machine_ 50...
-
Page 52: Supplied Software
Network PC Fax: You can send a fax from your computer without going to the machine. • Samsung Eeasy Printer Mager: Samsung Easy Printer Manager is an application that combines Samsung machine settings into one location. Samsung Easy Printer Manager combines device settings as well as printing environments, settings/actions and launching. -
Page 53: System Requirements
System requirements Before you begin, ensure that your system meets the following requirements: Windows Your machine supports the following Windows operating systems. REQUIREMENT (RECOMMENDED) OPERATING SYSTEM FREE HDD SPACE Windows 2000 Pentium II 400 MHz (Pentium III 933 MHz) 64 MB 600 MB (128 MB) Windows XP... -
Page 54: Unix
It is necessary to claim swap partition of 300 MB or larger for working with large scanned images. UNIX ITEM REQUIREMENTS Operating system Sun Solaris 9, 10 (x86, SPARC) IBM AIX 5.1, 5.2, 5.3, 5.4 (PowerPC) HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium) Free HDD space Up to 100 MB Installing a network connected machine’s driver... -
Page 55: Contact Samsung Worldwide
Contact SAMSUNG worldwide If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. COUNTRY/REGION CUSTOMER CARE CENTER WEB SITE ALBANIA 42 27 5755 www.samsung.com ARGOLA 91-726-7864 www.samsung.com ARGENTINE 0800-333-3733 www.samsung.com ARMENIA 0-800-05-555 www.samsung.com AUSTRALIA 1300 362 603 www.samsung.com... - Page 56 800-7267 www.samsung.com FINLAND 09 85635050 www.samsung.com FRANCE 01 48 63 00 00 www.samsung.com GERMANY 0180 5 SAMSUNG bzw. www.samsung.com 0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/ Min.) GEORGIA 8-800-555-555 www.samsung.com GHANA 0800-10077 www.samsung.com...
- Page 57 020 405 888 www.samsung.com MOROCCO 080 100 2255 www.samsung.com NAMIBIA 8197267864 www.samsung.com NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/ www.samsung.com min) NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com NICARAGUA 00-1800-5077267 www.samsung.com/latin_en (English) www.samsung.com/latin (Spanish) NIGERIA 0800-726-7864 www.samsung.com NORWAY 815 56480 www.samsung.com...
- Page 58 800-SAMSUNG (726-7864) www.samsung.com UGANDA 0800-300 300 www.samsung.com 0330 SAMSUNG (726-7864) www.samsung.com U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com UKRAINE 0-800-502-000 www.samsung.ua (Ukrainian) www.samsung.com/ua_ru (Russian) UZBEKISTAN 8-10-800-500-55-500 www.samsung.com VENEZUELA 0-800-100-5303 www.samsung.com VIETNAM 1 800 588 889 www.samsung.com ZAMBIA 211350370 www.samsung.com Contact SAMSUNG worldwide_ 57...
- Page 59 Contact SAMSUNG worldwide_ 58...
- Page 60 Index connect test network cable DADF skew turn on machine features supplied software Unix system requirements initial setting install Windows imaging unit optional high capacity feeder driver installation for network connected optional tray supplied software stand system requiremnets toner cartridge Linux supplied softwares system requirements...