Understanding Display Messages - Samsung CLX-9252 9352 Series User Manual

5. Remove the jammed paper by gently pulling it straight out.
6. Insert the booklet maker.
7. Close the finisher front door.

Understanding display messages

Messages appear on the display screen to indicate the machine's status or
errors. Some error messages are shown with graphics to help you
troubleshoot problem. Refer to the tables below to understand the
messages and their meaning, and correct the problem, if necessary.
Messages and their explanations are listed in alphabetical order.
• If a message is not in the table, reboot the power and try the
printing job again. If the problem persists, call for service.
• When you call for service, provide the service representative with
the contents of display message.
• Some messages may not appear in the display depending on
options or models.
• [color] indicates the color of toner or imaging unit.
• [tray number] indicates the tray number.
• [media type] indicates the media type.
• [media size] indicates the paper size.
• [error number] indicates the error number.
Message
Actuator Fan
Failure [error
number]:Please
open/close door.
Actuator Fan
Signal Failure
[error
number]:Please
open/close door.
Actuator Motor
Failure [error
number]:Please
open/close door.
Actuator Sensor
Failure [error
number]:Please
open/close door.
ADF System
Failure [error
number]:Call for
service if the
problem persists.
Booklet maker
Error [error
number]:Please
open/close door.
[color] Imaging
Unit Failure [error
number]:Install
[color] imaging
unit again.
[color] Imaging
Unit Failure [error
number]:Please
open/close door.
Troubleshooting_ 234
Meaning Suggested solutions
There is a problem in Open and close the front
the actuator fan. door. If the problem
persists, call for service.
There is a problem in Open and close the front
the actuator fan. door. If the problem
persists, call for service.
There is a problem in Open and close the front
the actuator motor. door. If the problem
persists, call for service.
There is a problem in Open and close the front
the actuator sensor. door. If the problem
persists, call for service.
There is a problem in Turn the machine off and
the dual automatic back on again. If the
document feeder. problem persists, call for
service.
There is a problem in Open and close the
the booklet maker. booklet finisher front
door. If the problem
persists, call for service.
There is a problem in Reinstall the imaging
the imaging unit. unit. If the problem
persists, call for service.
There is a problem in Open and close the front
the imaging unit. door. If the problem
persists, call for service.