Table of Contents
Advertisement
•
All other page order options of N-up are the same except for the
2Up. You can press Right-to-Down, Left-to-Down, Down-to-Left,
and Down-to-Right.
7. Press Border to print a border around each page on the sheet.
•
Off: Disables this feature.
•
Full Line: Prints a full line around each page.
•
Dotted Line: Prints a dotted line around each page.
•
Cross Line: Prints a cross line around each page.
8. Press OK from the display screen.
9. Press Start on the control panel to begin copying.
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press Yes. When you finish, press No on this window.
Image Repeat
This option prints several copies of the original image on the same side of a
single page. If you have other original in the DADF, all other original images
get printed the same way.
•
When you use this option, N-Up, Booklet and Book Copy in the
Advanced tab are inactivated.
•
When you select Auto Repeat, Auto Fit is not available option for
the Reduce/Enlarge feature.
•
When you select Manual Repeat, Reduce/Enlarge is not
available option in the Basic tab.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
3. Press the Advanced tab > Image Repeat from the display screen.
4. Press the appropriate option.
•
Off: Disables this feature.
•
Auto Repeat: The number of images is automatically determined
depending on the original image and the paper size. The number of
repeating images will be automatically selected based on size of the
original, size of output page and the reduce/enlarge ratio.
•
Manual Repeat: You can select the number of images manually
from 2, 4, 6, 8, 9 or 16.
5. Press Off in Border to print a border around each page on the sheet.
•
Off: Disables this feature.
•
Full Line: Prints a full line around each page.
•
Dotted Line: Prints a dotted line around each page.
•
Cross Line: Prints a cross line around each page.
6. Select a tray in Paper Source.
7. Press OK from the display screen.
8. Press Start on the control panel to begin copying.
Image shift copying
To avoid images overlapping with punch holes, staples, etc, you can move
the image's positon.
If you select Auto in Paper Supply, this feature remains inactive.
Copying_ 66
Advertisement
Table of Contents
Troubleshooting
