Changing The Contrast; Copying In A Mirror Image - Samsung CLX-9252 9352 Series User Manual

Changing the contrast

Set this parameter to adjust the contrast between Low and High.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
3. Adjust the settings for each copy such as Paper Supply,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 54).
4. Press the Image tab > Contrast from the display screen.
5. Press the left/right arrows to change the level.
Refer to the sample images below. Depending on the circumstances
and quality of originals, the printout's quality could be different from the
sample image's.
Low Moderatel
y low
6. Press OK from the display screen.
7. Press Start on the control panel to begin copying.
Original Moderatel High
y high

Copying in a mirror image

This feature allows you to copy in a mirror image.
1. Press Copy from the display screen.
2. Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 35).
3. Adjust the settings for each copy such as Paper Supply,
Reduce/Enlarge, Duplex and more in the Basic tab (see "Changing the
settings for each copy" on page 54).
4. Press the Image tab > Mirror from the display screen.
5. Press On to activate this feature.
6. Press OK from the display screen.
7. Press Start on the control panel to begin copying.
Copying_ 76