Save A Call Log Entry To The Directory - AT&T SynJ SB67108 User Manual

Caller ID
Caller ID operation

Save a call log entry to the directory

1. When in the call log, press
you wish to save.
Press the Edit softkey to select the displayed entry. Enter phone #: displays.
2.
3. Use the dialing keys to edit the number.
• Press
OFF
• Press and hold
• Press or
• Press
REDIAL
pause (see page 43).
Press the Flash softkey to enter a flash (see page 44).
•
4. Press �ENTER to move to the name. Enter name: displays.
MENU
• Use the dial pad keys to add characters (see page 43).
•
Press
OFF
• Press and hold
5. Press �ENTER to save the new directory entry. There is a
MENU
confirmation tone. To exit without making changes, press
NOTE: You will need to change how a caller ID number is dialed if the entry
does not appear in the correct format. Caller ID numbers might appear with an
area code that might not be necessary for local calls, or without a 1 that might
be necessary for long distance calls (see Make a call log entry ready to dial on
page 52).
�CLEAR on the handset to backspace and delete characters.
�CLEAR on the handset to delete all characters.
OFF
to move the cursor to the left or right.
�PAUSE to enter a three-and-a-half second dialing
�CLEAR on the handset to backspace and delete characters.
�CLEAR on the handset to delete all characters.
OFF
DIR or CID
to browse to the entry
54
�CLEAR.
OFF
dialed if the entry if the entry