Remote Access - AT&T SynJ SB67108 User Manual

Answering system

Remote access

You can access your handset answering system remotely by dialing
your telephone number from any touch-tone telephone.
To remotely access the answering system:
1. Dial your telephone number from any touch-tone telephone.
2. When the system answers, enter the four digit remote access
code of your handset (0001 is default code for handset 1, 0002 is
default code for handset 2 and so on. See page 19 to change it).
The system automatically announces the number of messages (new
and/or old) if there are any, and then begins to play them.
3. You can also enter the following remote commands.
Remote commands
•
1
•
•
2
•
3
•
•
4
•
•
•
5
•
6
•
Press to play to all messages.
Press to record a new announcement (during
announcement playback).
Press to accept the recorded announcement (during
announcement playback).
Press to delete the current message (during playback).
Press to delete the recorded announcement (during
announcement playback). ).
Press to repeat the current message (during playback).
After you hear "Repeat" and within five seconds, press 4
again to listen to the previous message (during playback).
Press to repeat the list of remote commands.
Press to stop and return to the remote commands
(during playback).
Press to end the recording (during recording announcement).
Press to skip to the next message (during playback).
63