Create Directory Entries; Create And Store A Directory Entry - AT&T SynJ SB67108 User Manual

Directory

Create directory entries

Create and store a directory entry

Use the following steps to store a name and number in the directory.
1. When the handset is idle:
• Press
MENU
-OR-
DIR to enter the directory.
• Press
2. Press the Add softkey to add an entry.
3. Enter or change the telephone number (up to 32 digits) using the
dial pad when prompted.
• Press or
• Press
OFF
and delete characters.
• Press and hold
• Press
REDIAL
pause (see page 43).
• Press the Flash softkey to enter a flash (see page 44).
• Press the Back softkey to return to the previous screen.
NOTE: If the telephone number in the directory exceeds 16 digits, < appears in front
of the telephone number. Press < to move towards the beginning of the telephone
number or press > to move towards the end of the telephone number.
�ENTER to save the number.
4. Press
MENU
5. Enter the name when prompted.
• Use the dial pad to enter a name (up to
16 characters). Each time a key is pressed, the
character on that key appears. Additional key
presses produce other characters on that key. See
the chart on the next page.
�ENTER twice to select Directory.
to move the cursor to the left or right.
�CLEAR on the handset to backspace
�CLEAR on the handset to delete all characters.
OFF
�PAUSE to enter a three-and-a-half second dialing
42
Directory
2 entries
Add Del All
Enter phone #:
8888832445
Back Flash
Enter name:
Robert Brown
Back