Line Selection; Change Handset Name - AT&T SynJ SB67108 User Manual

Getting started
Handset setup

Line selection

You can select the default telephone line to be used when you make
outgoing calls. This handset comes factory set for Auto selectable
line, which chooses the first available line for making a call. To select
a particular line, choose Line 1, Line 2, Line � or Line 4.
1. When the handset is idle, press MENU�
DIR or CID
2. Press
�ENTER.
Press
MENU
DIR or CID
3. Press
�ENTER.
Press
MENU
4. Press DIR or CID
Line 2, Line � or Line 4.
5. Press �ENTER to save the setting and return
MENU
to the previous menu. There is a confirmation tone. To exit without
making changes, press

Change handset name

You can create a handset name for each registered handset.
When the handset is idle, press MENU�
1.
DIR or CID
2. Press
3. Press DIR or CID
4. Change the handset name when prompted.
• Press or
• Use the dial pad to enter a name (up to 13
characters). Each time you press a key, a
character on that key appears. Additional key
presses produce other characters on that key.
See the chart on page 43.
• Press
OFF
delete characters.
• Press and hold
all characters.
5. Press �ENTER to save the setting and return to the previous
MENU
menu. There is a confirmation tone. To exit without making changes,
press
OFF
to scroll to Handset setup.
to scroll to Line selection.
to select Auto, Line 1,
to scroll to Handset setup. Press
to scroll to Handset name. Press
to move the cursor to the left or right.
�CLEAR to backspace and
�CLEAR to delete
OFF
�CLEAR.
ENTER
�CLEAR.
OFF
ENTER
15
.
LCD contrast
Key tone
Language
>Line selection
Back
Line selection
:Auto
Back
.
�ENTER.
MENU
�ENTER.
MENU
Key tone
Language
Line selection
>Handset name
Back
Enter HS name:
Handset 1
Back