Making A Call From The Call Log - AT&T Synapse SB67040 User Manual

Description Setup

Making a Call From the Call Log

The user may access the call log from Idle, dial, held call or active mode.
To make a call from the call log:
Figure. 39 Options - Call Log
Figure. 40 Call Log
SB67040 Remote Handset User's Guide - Making a Call 43
Answer
Make Call Call
1. To access the call log press OPTIONS. and observe that the menu shown
2. Press the down NAVIGATION key twice so that Call Log is highlighted
3. Observe that the menu shown in Figure 40 displays.
1.
2.
3. You have the following options:
Voice
Mail Hold/Park
in Figure 39 displays.
and press SELECT, or press 3.
Note To access the call log from Idle or dial mode, press
C-LOG.
Press the up or down NAVIGATION key to scroll through call log entries.
Press the left or right NAVIGATION key to scroll through the dialing options
for the call log entry (See "Call Log Dialing Options" on page
a. Press SELECT or PHONE to dial out the number selected (highlighted)
in the call log. If the user is accessing the call log from Idle mode,
pressing SPEAKER will also dial out the selected number. Note that a 9
will automatically be inserted before the number when dialed.
b. Press DELETE to delete highlighted call log entry.
c. Press EXIT to return to previous state
Call
Transfer Conference Trouble Glossary
44).