Before Starting The Work (230V) - Canon iR4570 Series Service Manual

2.1.2 Before Starting the Work (230V)

iR2270 / iR2870 / iR3570 / iR4570
1-1 Points to Make Before Installation
Be sure to go through the following before starting the work:
1) If you are installing the machine after moving it from a cold to warm location, be sure to leave the machine
unpacked for at least 2 hours so that the machine is fully used to the site temperature, thus avoiding image faults
caused by condensation. (The term "condensation" refers to the formation of droplets of water on the surface of a
metal object brought in from a cold to warm place, i.e., as the result of the rapid cooling of the moisture (vapor)
around the object.)
2) The machine weighs a maximum of about 80 kg(including a DADF). Be sure to work in a group of 4 persons when
lifting it.
1-2 Checking the Contents
Check to be sure that none of the following contents is missing:
Chapter 2
0008-3400
2-3