4Securing The Copier Main Unit; Securing The Copier Main Unit - Canon iR4570 Series Service Manual

Chapter 2
F-2-36
15) Close the front cover [1].
F-2-37
2.2.4 Securing the Copier
Main Unit
iR2270 / iR2870 / iR3570 / iR4570
- With a pedestal installed
1) Move the copier to the location where it will be
installed, and then secure it with the 4 adjuster
wheels of the pedestal.
- Without a pedestal installed
1) Remove the cassettes 1 and 2 and tighten the
adjusting screws [1] at the base plate temporarily
2-14
until the screw legs touch the bottom slightly.
2) Check if the machine wobbles while it is lying on
the desk or the floor, and tighten the adjusting
screws if necessary.
- When it wobbles in the direction shown by the arrow
A, tighten the screw at the right side in the above
picture.
- When it wobbles in the direction shown by the arrow
B, tighten the screw at the left side in the above
picture.
0006-6767
3) Mount the cassettes 1 and 2.
F-2-38
[B]
[A]
[B]
F-2-39
[A]