Checking The Connection To The Network; 1Overview; Overview; 2Using The Ping Function - Canon iR4570 Series Service Manual

2.3 Checking the Connection to the Network

2.3.1 Overview

iR2270 / iR2870 / iR3570 / iR4570
The instructions that follow apply only when the machine is connected to a network.
If the user's network environment is based on TCP/IP, use the PING function to make sure that the network settings
are correct.
If the user's network environment is based on IPX/SPX or AppleTalk, on the other hand, such a check need not be
made.

2.3.2 Using the PING Function

iR2270 / iR2870 / iR3570 / iR4570
1) Make the following selections in service mode: COPIER>TEST>NETWORK>PING.
2) Enter the correct IP address using the control panel keypad, and press the OK key.
3) Press the Start key.
- If successful, the indication will be 'OK'. If the attempt fails, however, 'NG' will be indicated.
< 1/1 >
<NETWORK>
PING 0. 0. 0. 0
[1]
+/-
F-2-64
[1] Result (OK/NG)
[2] IP address input

2.3.3 Making a Check Using a Remote Host Address

iR2270 / iR2870 / iR3570 / iR4570
You can use a remote host address in combination with the PING function to check the connection to the network.
The term "remote host address" refers to the IP address of a PC that is connected to the TCP/IP network to which the
machine is connected.
1) Inform the system administrator that you will be checking the network connection using the PING function.
<READY >
[2]
OK
Chapter 2
0007-5605
0007-5600
0007-5603
2-23