Chapter 8
F-8-151
2) Disconnect the connector from the cassette size
sensor relay PCB (in the case of the size sensor 1,
disconnect the connector [1]; in the case of the size
sensor 2, disconnect the connector [2]).
3) Free the harness from the clamp (in the case of the
size sensor 1, the 2 clamps [3]; in the case of the
size sensor 2, the 4 clamps [3] and [4]).
F-8-152
4) Remove the screw [1], and detach the cassette size
sensor together with the PCB [2] (in the case of the
size sensor 1, together with the size sensor 2; in the
case of the size sensor 2, remove the sensor on its
own).
8-80
F-8-153
5) Detach the cover [1] from the PCB.
F-8-154
6) Detach the size sensor [1] from the PCB.
F-8-155
8.8.8 Cassette Retry Paper Sensor
8.8.8.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570
0007-6611