Canon iR4570 Series Service Manual page 814

Sub-item
ERR Clearing an error code
(Object error code: E000/E001/E002/E003)
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
DC-CON Clearing RAM on the DC controller circuit board
The RAM is cleared when the main power switch is turned OFF and
ON.
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print out the
contents of the service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.
R-CON Clearing RAM on the reader controller circuit board
The RAM is cleared when the main power switch is turned OFF and
ON.
<Operating procedure>
1) Select COPIER>FUNCTION>MISC-P>P-PRINT to print out the
contents of the service mode.
2) Select this item and press the OK key.
3) Turn the main power switch OFF and ON.
4) Enter the P-PRINT output data as required.
JAM-HIST Clearing the jam history
The jam history is cleared when the OK key is pressed.
<Operating procedure>
1) Select this item and press the OK key.
ERR-HIST Clearing the error history
The error history is cleared when the OK key is pressed.
<Operating procedure>
1) Select this item and press the OK key.
PWD-CLR Clearing the password of the system administrator set in user mode
The password is cleared when the OK key is pressed.
<Operating procedure>
1) Select this item and press the OK key.
T-16-43
COPIER > FUNCTION > CLEAR
Description Level
1
1
1
1
1
1