Removing The Cassette Size Sensor Relay Pcb; Removing The Pickup Assembly 2; Manual Tray Assembly; Removing The Right Cover (Rear) - Canon iR4570 Series Service Manual

F-8-256
8.8.13.6 Removing the Pickup
Assembly 2
iR2270 / iR2870 / iR3570 / iR4570
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free the harness
from the guide; then, remove the 4 screws [2], and
detach the pickup assembly 2 [3].
F-8-257
8.8.13.7 Removing the Cassette
Size Sensor Relay PCB
iR2270 / iR2870 / iR3570 / iR4570
1) Remove the PCB cover [1] (snap-on).
F-8-258
2) Remove the cassette size sensor relay PCB [2] (3
connectors [2], 2 clamps [3]).
0007-6671
F-8-259

8.8.14 Manual Tray Assembly

8.8.14.1 Removing the Right
Cover (rear)
iR2270 / iR2870 / iR3570 / iR4570
0007-6672
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
Chapter 8
0007-6697
8-105