Maintenance Log
Internal Maintenance
The P2812HNU-51C has the ability to record the events occurring in the CPE in a
system log (according to severity) and maintain this log in itself or sending logs to
configured syslog server accordingly.
If the maintenance logs are enabled, the system will begin to log all the selected
events according to the selected Log Level. All the events above or equal to the
selected level will be logged.
If the selected Log Level is 'Remote', events will be sent to the specified Syslog
Server' s IP address and UDP port. If the selected Log Level is 'Local', events will be
recorded in the local memory. If the selected Log Level is "Both", events will be
logged locally, and sent to Syslog Server.
Activate the Maintenance Log.
1.
Go to Maintenance > Logs > Log Settings.
2.
Check the Active box.
3.
Select the preferred "Log Level".
4.
Select the logging Mode to specify the location to store the event logs.
Click "Apply".
All contents copyright (c) 2009 ZyXEL Communications Corporation.
P-2812HNU-51C Support Notes